Technical data

9
BEFORE USE
Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
 -
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the coee machine.
 
not place the appliance near taps or sinks.
 
freezes. Do not install the appliance in a room where the
temperature could drop below freezing point.
 
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
      
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
Setting up the appliance
Please note :
 
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
 
following the instructions in the section “Setting water
hardness” on page 17.
1. Insert the power cable connector into the socket at the
back of the appliance and connect the appliance to the
mains electricity supply (g. 1). Make sure the main switch
at the back of the appliance is pressed (g. 2).
You must rst choose the language (the languages scroll
through at intervals of about 3 seconds):
2. When English appears, press the button (g. 3)

Follow the instructions indicated on the appliance display:
   
with fresh water (g. 4A), then replace in the appliance

 
inserted on the nozzle and place a container holding a mini-
mum of 100 ml underneath (g. 5).
 
6. Press the button to conrm. The appliance delivers
water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note!
 
make 4-5 cups of coee or 4-5 cappuccinos before it starts
to give satisfactory results.
 -
mance of your appliance, we recommend installing a water
-
ER FILTER “ (page 17). If your model is not provided with
a lter, you can request one from De’Longhi Customer
Services.
TURNING THE APPLIANCE ON
Please note!

pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
  button (g. 6).
The message “Heating up Please wait” is displayed.
After heating, the message “Rinsing” is displayed. As well as
heating the boiler, the appliance also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message “READY” is
displayed and the taste has been selected.