Technical data

10
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 6). The
appliance performs a rinse cycle, then goes o.
Please note!
If the appliance is not used for an extended period, also place
the main switch (g. 2).
Important!

MENU SETTINGS
Press the MENU button to enter the settings menu.
Descaling
   
1616.
Adjust time
To adjust the time on the display, proceed as follows:
        
2. Press the or button until Adjust time is
displayed;
3. Press the button;
4. Press the or button to change the hour;
5. Press the button to conrm;
6. Press the or button to change the minutes;
7. Press the button to conrm.
The time is set: press MENU to exit menu.
Auto-o
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or after 1, 2 or 3 hours.
 
2. Press the or button until Auto-o is displayed;
3. Press the button;
4. Press the or until the number of hours of opera-
tion is displayed (15 or 30 minutes, or 1, 2 or 3 hours);
5. Press the button to conrm.
The auto-o is set. Press MENU to exit menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note :
To enable this function, the time must already be set correctly.
 
2. Press the or button until Auto-start” is displayed;
3. Press the 
4. Press the button to conrm;
5. Press the or button to choose the hour;
6. Press the button to conrm;
7. Press the or button to change the minutes;
8. Press the button to conrm;
 
   
indicated by the symbol displayed alongside the time and
under Auto-start” in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the 
3. Press the button to conrm.
The symbol is no longer displayed.
Setting the temperature
If you want to modify the temperature of the water used to
make the coee (low, medium, high, maximum), proceed as
follows:
 
2. Press the or button until “Set temperature is
displayed;
3. Press the button;
4. Press the or button until the required tempera-
ture is displayed (low, medium, high, maximum);
5. Press the button to conrm.
The temperature is set. Press MENU to exit menu.
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
When energy saving mode is active, an asterisk appears below
“Energy saving” in the menu.
 
2. Press the or button until “Energy saving is
displayed;
3. Press the     
displayed;
4. Press the button to enable or disable energy saving
mode;
Then press MENU to exit menu.
When the function is active, if the machine is not used for about
1 minute, “Energy saving” is displayed.