Technical data

11
Please note :
When in energy saving mode, a few seconds may elapse before
the rst coee is delivered as the appliance must heat up again.
Setting water hardness
For instructions on setting water hardness, see page 16.
Setting the language
To modify the language on the display, proceed as follows:
1 
2. Press the or utton until “Set language” is
displayed;
3. Press the button;
4. Press the or button until the required language is
displayed ;
5. Press the button to conrm;
The language is set. Press MENU to exit menu.
Install lter
For instructions on how to install the lter, see the section “In-
stalling the lter” (page 17).
Remove lter
For instructions on how to remove the lter, see the section “In-
stalling the lter” (page 18).
Replace the lter
For instructions on how to replace the lter, see the section “Re-
placing the lter” (page 17).
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
 
2. Press the or button until “Default values” is
displayed;
3. Press the button;
 
5. Press the button to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
 
2. Press the or button until “Statistics” is displayed;
3. Press the button;
  or button you can check:
- how many coees have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered;
- how many times the water lter has been replaced;
- how many cappuccinos and milk based drinks have been

5. Press then the button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 7) repea-
tedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to automatically deliver the fol-
lowing quantities of coee:
- short coee (≃40ml) when the button is pressed;
- long coee (≃120ml) when the button is pressed;
- two short coees when the button is pressed;
- two long coees when the button is pressed.
To change the quantity of coee the appliance delivers automa-
tically into the cup, proceed as described below:
- press and hold the button corresponding to the quantity
to be modied until “Program quantity” is displayed, then
release the button;
- when the coee in the cup reaches the required level, press
the same button again to memorise the new amount.
The machine is now reprogrammed with the new quantities.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (in drops), this can be corrected by adjusting the grin-
ding adjustment dial (g. 8).
Please note :
The grinding adjustment dial must only be turned when the
coee mill is in operation.