Technical data

16
36
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (see g. 37). If necessary, scrape the
groove with a toothpick.
5. Rinse inside the froth adjustment dial seat with running
water (see g. 38).
3837
6. Check that the intake tube and spout are not clogged with
milk residues.
 -
SERT”), the spout and the milk intake tube.
8. Place the lid back on the milk container.
Cleaning the hot water/steam nozzle
Each time you prepare milk, clean the nozzle with a sponge to
remove milk residues from the gaskets (see g. 20).
DESCALING
Descale the machine when the message “DESCALE” ashes on
the display.
Important!
         
eyes. It is vital to respect the manufacturer’s safety warn-
ings given on the descaler pack and the warnings relating
to the procedure to follow in the event of contact with the
skin and eyes.
 
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the coee machine on.
2. Press the MENU button to access the menu.
3. Press the or button until “Descale” is displayed.
4. Select by pressing the button. The message “Desca-

the function.
 
6. Empty the water tank (A10) completely and remove the
water softener lter (if present).
7. Pour the descaler into the water tank up to the level A (cor-
responding to a 100 ml pack) marked on the back of the
tank (g. 28), then add water (1 litre) up to level B (g.
28).
8. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout (A19) (g. 5).
Danger of burns!
Hot water containing acid ows out of the hot water spout.
Avoid contact with splashes of water.
9. Press the button to conrm that the solution has
been introduced. “Descale underway” is displayed.
The descaling programme automatically performs a series
of rinses at intervals to remove all the scale residues inside
the coee machine.

The appliance is now ready for rinsing through with clean water.
11. Empty the container used to collect the descaler solution
and replace it empty under the water spout.
12. Remove the water tank, empty, rinse under running water,
insert the lter (if present previously), ll the tank with

13. Press the button to conrm. Hot water comes out of
the spout and “Rinsing” is displayed.
14. When the water tank is completely empty, “Rinsing complete

15. Press the button to conrm.
16. Fill the water tank again and the machine is ready for use.
SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set.
The machine is factory set for a hardness value of 4.
groove
recess