Technical data

2.1 SETTING THE CLOCK
• The first time the appliance is connected to the household electricity supply or after it has been without
power for some time, four dashes (--:--) will appear on the display. To set the time, proceed as follows:
33
CHAPTER 2 - USING THE CONTROLS AND SETTING THE FUNCTIONS
Press the TIME ADJUST but-
tons (6) together for at least 2
seconds.
(The hour flashes).
1
Press the TIME ADJUST but-
tons (6) to set the required
hour.
2
Press the START button (8).
(The minutes flash).
3
Press the TIME ADJUST but-
tons (6) to set the required
minutes.
4
Press the START button (8).
(The set time is displayed).
5
• If you want to change the time set subsequently, repeat the setting procedure described above.
• The current time can be displayed even after having set a function by pressing the TIME ADJUST buttons
(6) together for at least 1 second.
(The time will be displayed for 2 seconds).
•To set longer times, hold the "+" or "-" button down (not together).