Use and Care Manual

10
Two arrows on the display indicate respectively air-conditioning
“COOL” and the fan speed.The most suitable temperature for the
room during the summer varies from 75 to 80°F (24 to 27°C).
Youarerecommended,however,nottosetatemperaturemuch
below the outdoor temperature.
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed
automatically.
Two arrows on the remote controldisplay indicate“DRY” and
“AUTO” respectively.
FAN MODE ONLY
In fan mode, fan speed can be set by pressing the fan button
“FAN” (16). The fan speed changes between the speeds available
(LOW/MED/HIGH). Two arrows on the display indicate the fan
mode and the speed set. In this mode, the auto speed cannot
be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown.
This avoids wasting electricity by not operating the appliance
when it is not needed.
How to program delayed shutdown
• Withtheairconditioninguniton,pressthetimerbutton
timer (19). The time is displayed and the “h” symbol ashes,
with a ashing arrow indicating timer shut-down.
• Setthetimewhenyouwanttheappliancetogoousing
the buttons (from 30 minutes to 24 hours). During the
rst ten hours, you can select half hour intervals. For times
greater than ten hours, one hour intervals can be selected.
• Press the timer button timer (19) again to conrm the
selection. The appliance emits a beep and the light
(H) ashes on the control panel, conrming successful
activation of the timer. A countdown of the time left is
displayed on the remote control display and the light (H)
ashes on the air conditioner display.
• At the end of the set time the appliance switches o
automatically.
• Tocancelthetimerprogramming,pressthetimerbutton
timer (19) again. The appliance emits a beep and both
displays reset to display the settings prior to activation of
the timer.
How to program delayed start up
• With the air conditioner o, press the press the timer
button (19) . An arrow indicating “timer start-up” ashes
on the display. Now make all the desired settings for when
the appliance will switch on (operating mode, fan speed
and temperature). Conrm the settings by pressing the
timer button (19). The time is displayed and the “h” symbol
ashes.
Set the time when you want the appliance to switch o
using the buttons (from 30 minutes to 24 hours).
During the rst ten hours, you can select half hour intervals.
For times greater than ten hours, one hour intervals can be
selected.
• Pressthetimerbutton(19)againtoconrmthestart-up
time. A beep sounds and the time set is also displayed on
the control panel, conrming setting of the timer. The light
(H) ashes on the air conditioner display. A countdown of
the time left is displayed on both displays.
• At the end of the set time the appliance switches on
automatically, with the settings made previously.
• Tocancelthetimerprogramming,pressthetimerbutton
(19) again. The appliance emits a beep and both displays
reset to stand-by.
TIPS
To ensure optimal performance from your portable air
conditioner, follow these recommendations:
• Close the windows and doors in the room to be air
conditioned.
The only exception is when the appliance is installed
through a hole in the wall.
In this case, you are recommended to leave a slight draught
through a door or window to guarantee correct ventilation.
close doors and windows
• Protect the room from direct exposure to the sun by
partially closing curtains and/or blinds to help the
appliance run more eciently.