Use and Care Manual

6
• Ifthewindowsarelarge,usethewindowbracketextension
(16) (if provided) to cover your window aperture, extending
it to the required length, then blocking it with the locking
pins supplied (see gure E). Make sure you do not cover the
hole for the window outlet.
1
3
2
SEMIPERMANENT INSTALLATION
If required, your appliance can also be installed semi-
permanently (Fig. F).
Proceed as follows:
• Drillaholeø5,25inches(134mm)inanoutsidewallor
through a window pane.
Respect the dimensions and height of the hole given in
gure G and H.
As special tools are required for installation,
we suggest you have the appliance installed by
specialized personnel.
• Fitthewallange(10)intothehole.
• Fit the air exhaust hose  (11)  in the relevant housing
located on the rear side of the appliance. (g. A).
• Fittheendofthehose(11)tothewallange(10)asshown
in g. H.
When the hose (11) is not connected, the drilled hole can be
closed with the ange cap (10).
NOTE: When installing the air conditioner semi-permanently,
you should leave a door slightly open little as 1/2“ (1 cm) to
guarantee correct ventilation and room pressure.
NOTE: Keep the air hoses as short and free of curves as possible
to avoid constrictions.
For help with installation, operation, and for all accessories and
spare/replacement parts, please contact our toll free customer
service call center at:
1-800-322-3848 [US only]
1-888-335-6644 [Canada only]
01-800-711-8805 (Mexico only]
or log onto our website at www.delonghi.com
E
H
F
G
D
in the
window
panel
in the wooden
kickboard
of a French
window
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.