User Manual

The instructions below will enable you to prepare your local air conditioner for operation as efficien-

tly as possible.

Before use, make sure the air intake and outlet grilles are unobstructed.

AIR-CONDITIONING WITHOUT INSTALLATION

Just a few simple steps and your comfort is

ensured with your air conditioner:

• Screw one of the hose adapters to one

end of the air exhaust hose .

• Fit the other adapter to the air exhau-

st hose housing at the back of the

appliance (see fig. A).

• Screw the end of the hose without adapter

to the adapter previously mounted on the

appliance (see fig. A).

• Fit the window outlet to the air

exhaust hose as shown in fig. B.

• Place the local air conditioner near a win-

dow or French window.

• Make sure the air exhaust hose is unob-

structed.

PREPARING FOR USE

Keep the air hose as short and free of

curves as possible to avoid constrictions.

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, check that:

• The mains power supply corresponds to the value indicated on the rating plate on the back of the

appliance;

• The mains socket and electrical circuit are adequate for the appliance;

• The mains socket matches the plug. If this is not the case, have the plug replaced;

• The mains socket is adequately earthed. Failure to follow these important safety instructions absolves the

manufacturer of all liability.

The power cable must be replaced by a qualified professional only.

• Open the window or French window sligh-

tly and position the outlet as shown in

figure C.