manual

21
7. If necessary, modify the pasta cooking time using the - ( 2 ) and + ( 3 ) but-
tons.
IMPORTANT WARNINGS
• the pasta cooking time can be modified at any moment except while the appliance is bringing the water
to the boil. If you press one of the two buttons - (2) or + (3) by mistake, "ERR" will be displayed on display
(1) for a few seconds. Operation, however, continues as normal. Wait until the basket is fully lowered
before modifying the cooking time if necessary.
• if you wish for any reason to interrupt the programmed automatic cooking before the Pasta Cooker begins
the heating phase, just press the TIMER ON button (8). The relative LED (9) goes out. If, on the other hand,
the Pasta Cooker is already operating and heating the water (LED 5 already on), to interrupt press the
START/STOP button (4).
• if during programming there is no power for more than a few seconds, the appliance returns to the ini-
tial state and the memorised settings are lost.
• the programmed cooking timer is limited to a maximum of 24 hours from activation of the ON indicator
light.
•programmed cooking can be activated if the Pasta Cooker has time to bring the water to the boil and
cook the pasta for the specified time. If the time requested is too short, the Pasta Cooker will display an
"ERR" message when the TIMER ON button is pressed. If this occurs, simply set the TIMER for a longer
period.
• there may be a maximum tolerance of about five minutes longer than the time set.
• once programmed cooking has been activated (TIMER ON indicator light on), the time reappears on the
display. To display the programmed cooking time, just press the TIMER button. The setting reappears for
a few seconds.
8:09 8
GB 2-07-2003 10:21 Pagina 21