Printed in China De’Longhi Appliances via Seitz, 47 31100 Treviso Italia 5711010611/05.
Instructions for use. Keep these instructions Mode d’emploi. Conservez cette notice Instrucciones para el uso Repase y guarde estas instrucciones Lea cuidadosamente este instructivo antes de usar su aparato Visit www.delonghiregistration.com to register your product on-line. Visit www.delonghi.com for a list of service centers near you. Visitez www.delonghiregistration.com pour enregistrer votre produit en ligne. Visitez www.delonghi.
2
Description/Descripción A B G C F D E H I L 3
Important safeguards en Introduction dicated in the instruction leaflet. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair. - Do not use the appliance outdoors. - This heater is not intended for use in bathrooms, laundry areas, or similar indoor locations. Never position the appliance where it may fall into a bathtub or come in contact with water. - Do not run the power cord under carpeting. Do not cover cord with throw rugs, runners, or the like.
Description/Use en SAVE THESE INSTRUCTIONS fective outlets must be replaced before using the heater. Plugging the heater into a worn outlet may result in overheating of the power cord or may cause the risk of fire. - If the power cord is damaged, to reduce the risk of malfunction it must be replaced by the manufacturer, its service agent, or a licensed and qualified professional. - Do not use this appliance with an extension cord or outlet strip. Connect the appliance directly to a suitable outlet.
Use en between: MED-MIN-OFF. If MIN power level has been selected, the appliance will cycle between: MIN-OFF. Your product is equipped with a polarized alternating current line plug (a plug having one prong wider than the others). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Safety device/Maintenance/Troubleshooting en program to be stored. The current settings and symbol are displayed. At the end of the set time the appliance switches off automatically. To go back to operating without the timer, press the timer button twice. The timer symbol disappears from the display. (High temperature) When the product’s internal temperature is too high, the heating power will progressively and automatically be reduced.
