Upright Vacuum Cleaner Instruction

6
reduced noise when cleaning hard floors
and upholstery.
• Minimum power: indispensable for vacu-
uming delicate textiles and upholstery, to
avoid strong suction on the fabric which
may tear the fabric and reduce cleaning
performance.
CLEANING AND MAINTENANCE
Before carrying out cleaning or mainte-
nance, always remove the plug from the
power socket.
Full-bag indicator (5)
The full-bag indicator is on the lower part of the
broom and is activated when the suction hose is
blocked or the dust bag is excessively full.
Changing the dust bag
Remove hatch cover (6) by pulling it out-
wards (fig.9)
Release the dust bag.
Fit with a new dust bag, making sure to
slide the cardboard collar correctly into its
grooves (fig. 10-11).
Replace the hatch cover and secure in place
by pressing until it locks (fig.12).
Care of the motor filter
In order to maintain the maximum suction ef-
ficiency, and to ensure that the motor is ade-
quately cooled and that the air vented from
the appliance contains no dust particles, the
motor filter should be cleaned regularly.
Wash the motor filter in water with a little
household detergent, and allow to dry thor-
oughly before replacing (fig.13).
Replacing the microfilter/s
The electrostatic 3M-filter assures a high-
quality out-put of air as it retains dust, pol-
lens, etc.
To maintain its efficiency, the micro-filter
should be changed every 2-3 months.
To replace the micro-filter, lift the front air
exhaust grille and remove filter. Replace with
a new filter and close the grille pressing it
down firmly (Fig. 14).
Storing the machine
Store leaning against a wall with the power
head with brush down to prevent slipping.
Or else, hang on the wall by the hole in the
handgrip on a nail, hook, or a screw with
plug.