User's Manual

ANrev9 Confidential 7
 The Signal LED flashes green once every three
seconds when the inReach is sending a message of
any type. The LED will stop flashing when the
message is sent.
 The Signal LED flashes red once every three
seconds when there is a problem sending or
confirming a message. The Signal LED will flash red
until the message is successfully transmitted or
cancelled. If the LED is flashing red, try moving to a
new location to get a better view of the satellites.
Using the Earthmate App
When you pair your DeLorme inReach with the
Earthmate Android phone
app, you can use your phone
to send and receive
messages when you are out
of cell phone range—whether
you just want to share your
trip, check in with loved ones,
or send an SOS in an
emergency.
Download and install the
Earthmate app from the
Android Marketplace on your
phone before you begin. Note Requires Android 2.1
or later firmware.
Pair the inReach and Phone
With the Earthmate app open, press Menu > Pair and
follow the on-screen instructions pair the devices.
If you turn off your phone to save battery life, the
inReach will continue any messaging or tracking that is
in progress.
You need only pair the devices once. After you have
successfully paired the devices, the Pair menu option
changes to Connect.
Sync Account Info
Open the Earthmate app and enter your
explore.delorme.com account info. The phone
automatically syncs with the website when you have a
data connection, or you can choose the manual sync
option.