User's Manual

Clock
Displaying the Time
By default, the time of day is displayed only when the ignition is ON and the radio is OFF. The Clock can be set to show the time also
when radio is ON, by doing the following:
1) Push MENU
15
button.
2) Push button
13
or until “CLOCK” is displayed.
3) Push button
14
to enter Clock sub menu.
4) Push button
13
or until “VISIBLE” is displayed.
5) Push button
14
to change between ON/OFF status.
12- or 24-Hour Format
The clock can be set to 12-hour or 24-hour mode. The 12-hour mode distinguishes between AM and PM.
To change the time format, do the following:
1) Push MENU
15
button.
2) Push button
13
or until “CLOCK” is displayed.
3) Push button
14
to enter Clock sub menu.
4) Push button
13
or until “12/24 HR” is displayed.
5) Push button
14
to change between 12H or 24H options.
Setting the Clock
Normally the time is set automatically by the trucks system. The option to manually set the time will then not be available.
To set the clock manually, do the following:
1) Push MENU
15
button.
2) Push button
13
or until “CLOCK” is displayed.
3) Push button
14
to enter Clock sub menu.
4) Push button
13
or until “SET TIME” is displayed.
5) Push button
14
to enter the Set time sub menu.
6) Push button
13
or to adjust the hours up or down respectively.
7) Push button
14
to set the hour and toggle to the minute adjustment.
8) Push button
13
or to adjust the minutes up or down respectively.
9) Push button
14
to save the time and finish the process.
Turning the alarm ON or OFF
To set turn On or Off the Alarm time, do the following:
1) Push MENU
15
button.
2) Push button
13
or until reaching “Wake Up Alarm” is displayed.
3) Push button
14
to enter the Wake up alarm sub menu.
4) Push button
13
or until “On/Off” is displayed.
5) Push
14
button to change the alarm status.
9
17
17
17
17
17
17
17
17
17
17