User's Manual

1
9
::Press the button for less than 2 seconds while playing an MP3 file to
find the previous folder on the disc.
Home Jump: Press the button for more than 2 seconds while playing an
MP3 file to start playback at the first file in the first folder.
::Press the button for less than 2 seconds while playing an MP3 file to
find the next folder on the disc.
End Jump: Press the button for more than 2 seconds while playing an MP3
file to start playback at the first file in the last folder.
EJECT: Press the button to eject a disc.
To remove a USB device simply pull the device out of the USB port. The radio
will return to its previous mode/source.
Using an iPod
®
The radio is capable of controlling and playing music from an iPod. We
recommend not connecting the 3G iPhone or iPod Touch to the radio.
Playing an iPod
Insert the iPod USB cable connector to the radio USB connector (the other end
connected to your iPod). iPod READING will appear on the display. Insert the
3.5mm audio cable connector to the radio aux input jack connector (the other
end connected to your iPod 3.5mm audio jack connector). If the audio cable is
not connected the radio will display FRONT AUX JACK UNPLUGGED. After all
the connections have been made and the radio has finished reading the iPod,
the iPod will begin playing. The elapsed time and the track number will be
displayed. Play begins from current track played on iPod and continues
sequentially through all tracks from the iPod’s last selected mode. After playing
the last track of the iPod’s last selected mode, play stops and the radio will
display the iPod Menu.
Button Functions
SEEK : :
Press for less than 2 seconds to forward to the next track. Press
and hold the same button to fast forward. When you release the button, the
track will continue to play.
SEEK : : Press for less than 2 seconds to go to the beginning of the current
track, if pressed within the first 10 seconds of the track, the radio goes to the
previous track. Press the button again within the first second to go to the
beginning of previous track. Press and hold the same button to fast reverse.
When y
ou release the but
ton, the trac
k will continue to pla
y
.
ADVERTENCIA DE DAÑO VEHICULAR
En el presente manual, encontrará los siguientes avisos:
En el área de AVISO, se le informa de algo que puede dañar su vehículo. Es
posible que muchas veces este daño no esté cubierto por su garantía y podría
ser costoso. El aviso le indicará qué hacer para evitar los daños.
NOTA: Es posible que otros manuales utilicen la sección AVISO de forma diferente.
INSTRUCCIONES DE FUNCIONAMIENTO
Para sacar el máximo provecho de su receptor Delphi, lea todas las
instrucciones a continuación.
Cómo utilizar el reloj
El reloj puede funcionar en modo de 12 ó 24 horas. El modo de 12 horas
distingue entre a.m. y p.m. El modo de 24 horas funciona como la hora militar.
Cómo configurar el reloj
1. Encienda el contacto del vehículo.
2. Mantenga presionado el botón “i Title/Menu” durante más de 2 segundos
hasta que aparezca el menú. Esto indica que se encuentra en el modo de
menú.
3. Presione el botón OK para ingresar al submenú del reloj.
4. Presione el botón ON/AUDIO o los botones UP/DOWN para cambiar a
SET TIME. Presione el botón OK para ingresar al modo de configuración.
5. Gire el botón ON/AUDIO o presione los botones UP/DOWN para cambiar
entre el formato de 12 ó 24 horas. Presione el botón OK para seleccionar
uno.
6. La pantalla cambia a configuración del reloj, con lo cual los dígitos de la
hora destellan. Gire el botón ON/AUDIO o presione los botones UP/DOWN
para cambiar la hora. Si gira el botón hacia la derecha o presiona el botón
UP, la hora aumentará. Si gira el botón hacia la izquierda o presiona el botón
DOWN, la hora disminuirá.
7. Presione el botón OK para que los dígitos de minutos destellen. Gire el
botón ON/AUDIO o presione los botones UP/DOWN para cambiar los
minutos. Si gira el botón hacia la derecha o presiona el botón UP, los
minutos aumentarán. Si gira el botón hacia la izquierda o presiona el
botón DOWN, los minutos disminuirán.
Si en cualquier momento del proceso no presiona ni gira un botón dentro de los
8 segundos, se cancelará el modo de configuración de la hora, la radio regresará
a su funcionamiento normal y conser
v
ará todos los cambios de configuración
que se hayan realizado. Si presiona los botones de encendido o banda, el reloj
AVISO:
Esto significa que hay algo que podría dañar su vehículo.
48