User's Manual
WorldHeadquartersandCustomerCenter5725DelphiDriveTroy,Michigan48098‐2815USA
Re: Certification for Delphi BCM
FCC ID: L2C0042TR
IC: 3432A-0042TR
The device under test is manufactured by the grantee (Delphi Delco Electronics Systems) and
sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee
must ensure the end-user has all applicable / appropriate operating instructions.
When end-user instructions are required, as in the case with this product, the grantee must notify
the OEM to notify the end-user.
Delphi Delco Electronics Systems will supply the following information to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial product:
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to ensure
continued FCC and Industry Canada regulatory compliance. The ID numbers must be
included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.
************************************************************************
FCC ID: L2C0042TR IC: 3432A-0042TR
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment. The term “IC:” before the
radio certification number only signifies that Industry Canada technical specifications were met.