User's Manual

World Headquarters and Customer Center 5725 Delphi Drive Troy, Michigan 48098-2815 USA
Re: Certification for Delphi CID
Model: CID-315
FCC ID: L2C0044TR
IC: 3432A-0044TR
The device under test is manufactured by the grantee (Delphi Delco Electronics Systems) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-
user has all applicable / appropriate operating instructions.
When end-user instructions are required, as in the case with this product, the grantee must notify the OEM to
notify the end-user.
Delphi Delco Electronics Systems will supply the following information to the reseller/distributor dictating
what must be included in the end user’s manual for the commercial product:
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to ensure continued
FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if
the device label is not readily accessible to the end user. The compliance paragraphs below must be
included in the user's manual.
************************************************************************
FCC ID: L2C0044TR IC: 3432A-0044TR
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance
could void the user's authority to operate the equipment. The term “IC:” before the radio certification number
only signifies that Industry Canada technical specifications were met.