User's Manual

5725 Delphi Drive, Troy, Michigan USA 48098
The device under test is manufactured by the grantee (Delphi Electronics & Safety), and sold as an OEM
product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all
applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this
product, the grantee must notify the OEM to notify the end-user.
Delphi Electronics & Safety will supply this document to the reseller/distributor dictating what must be included
in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual to ensure
continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the
manual if the device label is not readily accessible to the end user. The compliance paragraphs below
must be included in the user's manual.
******************************************************************************
Model / FCC ID: L2C0055TR IC: 3432A-0055TR
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance could
void the user's authority to operate the equipment. The term “IC:” before the radio certification number only
signifies that Industry Canada technical specifications were met.
******************************************************************************