User's Manual

The device under test is manufactured by the grantee (Delphi Electronics & Safety), and sold
as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must
ensure the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the OEM to notify
the end-user.
Delphi Electronics & Safety will supply this document to the reseller/distributor dictating what
must be included in the end user’s manual for the commercial product.
Information to be included IN the end USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.
******************************************************************************
FCC ID: L2C0056TR IC: 3432A-0056TR
Models: UFOB2, UFOB0, SFOB
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
WARNING: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment. The term “IC:” before the
radio certification number only signifies that Industry Canada technical specifications were met.
******************************************************************************
Delphi Electronics and Safety
3000 University Drive
Auburn Hills, MI 48326