Satellite Radio Receiver · Quick Guide Model SA10113 Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property.
stuff...
headphones rechargeable lithium ion battery vehicle antenna vehicle cradle cassette adaptor vehicle power adaptor receiver swivel mount (with extra adhesive pad) flush mount vent mount cleaning kit
Controls Turn on your MyFi by pressing the power button. You should be able to hear channel 1, the XM Preview Channel, through your ear buds or attached stereo/speakers.
Before you begin, take a moment to familiarize yourself with your MyFi’s controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the “menu” button and the dial.
ready... Getting set up 1 2 3 Install the battery Be sure to charge your battery for several hours on the home stand before use. Set up Assemble your MyFi and its home stand as shown. Connect to stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers.
set... Activate and explore Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your MyFi’s package and under the battery.) Write the ID here: The XM Radio ID does not use the letters I, O, S, and F. XM subscription required for reception of XM service. Not available in Alaska or Hawaii. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.
go! Charge the battery and store some music 2go: Store and play back with a single button Your MyFi lets you store up to five hours of programming and play it back at a later time. Listen to XM wherever you are, including on an airplane, subway, or anywhere satellite coverage may be limited. While the battery is charging in the home stand, try storing some XM programming from XM’s lineup of over 130 channels! TO STORE: 1. Turn on your MyFi and select a channel. 2. Press the “2go” button.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The Delphi XM MyFi Satellite Radio Receiver incorporates an FM transmitter and is therefore classified as an intentional transmitter.