Satellite Radio Receiver · User Guide Model SA10113 Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The Delphi XM MyFi Satellite Radio Receiver incorporates an FM transmitter and is therefore classified as an intentional transmitter.
Table of Contents A Brief History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Delphi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About XM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Let’s Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Main controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Remote control . . . . . . .
A Brief History Ever since XM Satellite Radio signed up its first subscriber in 2001, Delphi and XM have been working constantly to create the best satellite radio receiver. We imagined a radio that works not only in a vehicle, a home, or an office, but something you can take with you virtually anywhere you go. Now we have it: introducing MyFi, the world’s first truly portable satellite radio receiver.
About Delphi Delphi is a worldwide leader in mobile electronics, vehicle components, and audio technology. Delphi created the first in-dash car radio in 1936 and continues its strong tradition of innovation in the audio industry. Now Delphi technology has helped make satellite radio a reality, and Delphi continues to expand its in-vehicle and consumer electronics technologies.
Let’s Get Started First, some important reminders We know you’re eager to turn on your brand new MyFi and listen to XM. Please take a moment to remember the following: Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property.
Warning: If you use your MyFi in a moving vehicle or watercraft, keep your eyes on the road or water, and hands on the wheel or controls. Not doing so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. Caution: Your MyFi is not waterproof. Avoid splashing it with liquids and never submerge it.
REMOTE CONTROL search button – search by scanning presets or by scanning all channels 2go button – store up to five hours of XM programming jump button – switch to previous channel arrow buttons – view channel categories (“LIVE”); skip to previous or next song (“MY XM”) preset/direct button – switch between direct channel entry or up to 30 presets number keys – enter a channel directly or select your favorite presets DISPLAY SCREEN lock indicator listening mode – show current playback mode (“LIVE” or “MY
power button – press to turn your MyFi on and off mode button – switch between “LIVE” XM and “MY XM” playback channel buttons – preview channels (“LIVE”); preview songs (“MY XM”) menu button – customize options and access advanced features XM button – select channel or menu option; push and hold to add artist/song to your TuneSelect list pause button – pause “MY XM” playback volume buttons – raise or lower volume only when headphones are plugged in mute button – mute live XM display button – change the app
What’s in the box? Your MyFi includes these components: MyFi receiver belt clip/stand remote control wearable antenna with two clip options home stand protective case home antenna home power adaptor 10 audio cable
rechargeable lithium ion battery headphones vehicle antenna cassette adaptor vehicle cradle vehicle power adaptor swivel mount (with extra adhesive pad) flush mount vent mount cleaning kit Velcro pads ® 11
Setting Up Assembly Insert the battery and assemble your MyFi and its home stand as shown; plug the AC adaptor into an outlet. Let the battery charge for at least three hours. Insert battery Important! You will need to fully charge your MyFi battery for at least three hours to have sufficient battery power for portable use.
Connecting to a stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers. 5V DC ANT LINE OUT Connect to stereo Receiving the XM signal Turn your MyFi on by pressing the power button. You should be able to hear channel 1, the XM Preview Channel. If you do not, and the screen displays “NO SIGNAL,” try moving your MyFi’s antenna to another location.
Activating Your MyFi Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your MyFi’s package and under the battery.) Write the ID here: The XM Radio ID does not use the letters I, O, S, and F. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the XM Radio ID and a major credit card.
Listening To XM Changing channels 1. Rotate the dial to preview a list of channels. 2. When your desired channel is highlighted, press the dial in to select that channel. -OR1. Press the “pre/dir” button until the word “DIRECT” flashes in the display. 2. Press the number keys corresponding to a channel number. For channel 8, press “8.” For channel 130, press “1,” then “3,” then “0.” -OR1. Press the “ ” or “ ” buttons while in “LIVE” mode. You will see the channels organized by category. 2.
Saving favorite channels into presets Your MyFi can store up to 30 of your favorite channels as presets. The presets are organized into three banks (A, B, or C) that each contain 10 presets. TO SAVE A CHANNEL INTO A PRESET: 1. Tune to the channel using the dial or by entering the channel number. 2. Press the “pre/dir” button until “PRESET A,” “PRESET B,” or “PRESET C” appears in the display. 3. Press and hold a number key to save that channel into that preset.
Storing song information in memory Ever hear a song and later forget the artist’s name or song title? Let your MyFi remember for you. TO STORE A SONG’S INFORMATION IN MEMORY: Press and release the “mem” button while the song or program is playing. Your MyFi will beep to confirm. TO RECALL A SONG’S INFORMATION FROM MEMORY: Press and hold the “mem” button until your MyFi beeps and you see “Memory Recall” in the display.
My XM 2go: Store and play back Your MyFi lets you store up to five hours of programming and play it back at a later time or where live signal reception is limited. Listen to XM wherever you are, whenever you prefer. TO STORE BY PRESSING ONE BUTTON: 1. Turn on your MyFi and select a channel. 2. Press the “2go” button. To prevent you from accidentally recording over a previously stored program, your MyFi will ask you to confirm. Press the “2go” button again.
Scheduling a session You can set your MyFi to store XM programming at a specific time. 1. Press the “menu” button and use the dial to select “MY XM.” 2. Select “Schedule MY XM.” 3. You can schedule up to two sessions. Choose “Session 1” or “Session 2.” 4. Rotate the dial to change and press the dial in to fill in the “How Often?,” starting time, ending time, and channel fields. The “How Often?” option allows you to activate the session “Once,” “Every Day,” or “Off” (postponing until another time).
Personalizing Your MyFi You can easily adapt your MyFi to the way you listen and use the satellite radio. You can change how the display appears, track stocks and other information, adjust your MyFi’s audio output, and change how you use the display. Simply press the “menu” button, rotate the dial to highlight an option, and press the dial in to select. Your MyFi guides you with instructions right on the screen.
TO CHANGE THE AUDIO LEVEL of the cassette adaptor, FM transmitter, or line-level audio output: 1. Press the “menu” button and use the dial to select “Set Audio.” 2. Select “Line Out Level.” Your MyFi can detect when you’re using the FM transmitter or cassette adaptor and will make the appropriate changes to the settings. 3. Rotate the dial to change the audio level. Push the dial in to confirm. 4. When you’re done, press the “menu” button until you return to normal operation.
TO CHANGE THE APPEARANCE OF THE SCREEN, press the “menu” button and select “Change Display.” You can change the brightness and contrast, set how long the backlight remains on, flip the screen between positive (black characters on white background) or negative (white characters on black background) modes, and set the way the Stock Ticker and Info Extras appear on the screen.
Make any FM radio an XM radio Your MyFi contains a built-in FM transmitter that sends the XM audio signal to any nearby FM radio—home stereo, boombox, car radio, or marine radio. 1. Turn on your FM radio and turn off your MyFi. Unplug any headphone or audio cable from your MyFi’s headphone jack and any audio cables connected to the home stand or vehicle cradle. 2. You need to find an FM frequency that is not being used by any commercial FM station. Tune your FM radio to the following frequencies: 88.1, 88.
Stock Ticker With your MyFi, you can track up to 20 stock symbols and see their prices and movements right on the screen.* TO ADD A STOCK SYMBOL: 1. Using the “menu” button and dial, select “Stock Ticker.” 2. Rotate the dial to highlight “Add Stocks” and press the dial in to select. 3. Rotate the dial to add each letter of the desired stock symbol. Press the dial in after choosing each letter.
Direct Tune: Select channels faster Normally as you rotate the dial, you can preview what’s playing on other XM channels before you push the dial in to select a channel. To automatically tune to the channel without pressing the dial, you can set the following option: 1. Use the “menu” button and dial to select “Channel Access.” 2. Select “Direct Tune.” 3. Select “Direct Tune On.” (To return to the factorydefault method, select “Direct Tune Off.
Skipping channels You can simplify the list of channels that you see when you rotate the dial. To skip over a channel: 1. Use the “menu” button and dial to select “Channel Access.” 2. Choose the “Channel Skip/Add” option. 3. You will see a list of channels. There is a “+” or a “-“ in front of each channel. To skip a channel, highlight that channel and press the dial in to change the “+” to “-.” To add a channel, change the “-“ to a “+.” 4.
Using MyFi At Home Turn off your MyFi and your audio system. Connect your MyFi to your audio system in either way illustrated below. If you use the home stand and connect it to a stereo, you must plug in the AC adaptor and home antenna. Your MyFi’s audio output will not work if these are not connected. If you attach your MyFi to powered speakers, adjust the audio level using the speakers’ volume control. TIP: If you hear nothing, try adjusting the volume controls located on your MyFi.
Aiming the home antenna Your MyFi can help you aim the home antenna to pull in the strongest signal available. 1. Using the “menu” button and dial, choose “Antenna Aiming.” 2. Slowly turn and tilt the antenna. The signal bars on the display will change. Find the position that gives at least two bars on either “satellite” or “terrestrial.” 3. The antenna aiming screen remains as long as it’s needed to help you position the antenna.
Using MyFi In Your Vehicle Because every vehicle is different, we can only provide some general guidelines. If you need help, consult a professional installer. 1. Decide which method (cassette adaptor, wireless FM transmitter, or wired connection) is best for your vehicle and location. 2. Always do a trial run before installing anything permanently. Temporarily connect all power, audio, and antenna lines.
TO XM RADIO XM ANT Made in Malaysia TO FM RADIO TO FM ANT For a neat, fully integrated installation, use the DELPHI FM DIRECT ADAPTOR (model SA10112, sold separately). We recommend that you consult a professional installer. The WIRELESS FM TRANSMITTER is the easiest and quickest way to hear XM programming in your vehicle. Simply set your FM radio and your MyFi to the same frequency.
Placing the antenna Your XM antenna should be mounted on the vehicle’s metallic roof, at least 6" from any window or sunroof. It can be placed in the front, middle, or rear of the roof. (Two optional locations) Avoid crimping, twisting, or chafing the XM antenna cable. Try to use existing holes, body grommets, and other wiring channels. If the vehicle is a hard- or soft-top convertible, you may mount the antenna on the metal trunk lid. It should be at least 4" from the rear window.
Mounting your MyFi on the dash We’ve included three types of mounts to help you install your MyFi in your vehicle’s interior. FLUSH MOUNT: Attach the included Velcro® pads or adhesive pad to the back of your MyFi’s vehicle cradle. Stick the vehicle cradle onto a flat surface in your vehicle, preparing the surface as described below. Do not install the mount on a leather surface. Doing so could permanently damage the surface. VENT MOUNT: Assemble the vent mount as shown.
Using MyFi On The Go Your MyFi contains a built-in antenna that works best when your MyFi receiver is upright. Use the belt clip to hold your MyFi in the proper position; laying your MyFi down flat may weaken reception. TIP: If you carry your MyFi in a bag or use it while exercising, you can lock the buttons and dial and prevent something from accidentally pressing the buttons. Press and hold the “mute/pause/lock” button until you see the lock indicator in the display.
Signal reception guidelines Your MyFi’s antenna should have an unobstructed view of the XM satellites in the southern sky. In large cities, XM also has a network of ground repeaters to help increase the signal coverage.
Other Things You Should Know Care You should be able to take your MyFi along with you during most of your daily activities. Still, you should remember: • Your MyFi is not waterproof. Avoid splashing it with liquids and never submerge it. • Take your MyFi with you when you leave your vehicle, especially on a hot day. Not only can you continue to enjoy XM programming, but you’ll also prolong the life of your MyFi’s case, display, and battery.
TIP: Both the home and vehicle power adaptors can be used independently from the home stand and vehicle cradle, plugging directly into the MyFi power connector. This feature provides a convenient alternative for battery charging and powered operation when traveling or for using your MyFi away from home. Accessories (sold separately) We’re always developing useful and clever accessories for your MyFi. Check out www.xmradio.com or visit your favorite electronics retailers frequently.
Troubleshooting Your MyFi should provide you with trouble-free performance without needing any servicing. If it does not appear to be working properly, first try to remedy the problem by following these steps: 1. Attach all connections firmly and securely. 2. Make sure the battery is fully charged. 3. Reset your MyFi by removing the battery cover and inserting a paper clip into the hole marked “RESET” at the upper left-hand corner of the case.
If this happens: You should: There is no power, or your MyFi shuts off quickly. Insert your MyFi into its home stand and plug the AC adaptor into the wall to charge the battery. Your MyFi’s battery is low (see page 12). You do not receive all XM channels you have subscribed to. Contact XM Satellite Radio Your MyFi may not be activated (see page 14). Audio sounds distorted when using the built-in FM transmitter. Reduce audio output level (see page 20).
If this happens: You should: Your MyFi’s controls do not respond. Check whether the lock indicator is being displayed. If so, unlock the controls by pressing and holding the “mute/pause/lock” button until the lock indicator disappears (see page 33). If you have unlocked the controls and they still do not respond, reset your MyFi by carefully inserting the tip of a paper clip into the “RESET” hole under the battery cover. You can also reset your MyFi by removing and reinserting the battery.
Contacting technical support and customer service For additional information in solving problems with your MyFi, contact Delphi Technical Support at 1.877.GO.DELPHI (1.877.463.3574) 8:00 a.m. to 8:00 p.m. Eastern Time, Monday—Friday. Technical Support is also available at www.delphi.com. Technical information DIMENSIONS MyFi receiver: 4.5 in. H x 2.8 in. W x 1.2 in. D (114 mm H x 71 mm W x 30 mm D) MyFi remote: 4.8 in. H x 1.9 in. W x 1.2 in. D (122 mm H x 48 mm W x 30 mm D) WEIGHT MyFi receiver: 7.2 oz.
Warranty Delphi limited consumer warranty Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite Radio Products sold by Delphi (each “Product”) to be free of defects in material and workmanship, subject to the following conditions: Subject to express limitations with respect to the battery and ear bud components of any Product, the duration of Delphi’s warranty with respect to each Product is limited to one (1) year from the date of sale to the original consumer purchaser.
How you (the Customer) can get service To obtain warranty service during the first thirty (30) days after the date of purchase, you must return the defective Product with the original receipt to the original place of purchase. To obtain warranty service during the first thirty (30) days for Products purchased from www.delphi.com and for all Products for the remainder of the limited warranty period, you must contact Delphi by phone at 1.877.GO DELPHI (1.877.463.3574) or by fax at 1.866.790.3675.
Delphi Corporation 1441 West Long Lake Road Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI www.delphi.com MyFi is a registered trademark of Delphi Corporation. Printed on Recycled Paper ©2004 Delphi Corporation. All rights reserved. DPSS-04-E-076 The XM name, XM2Go, TuneSelect, and related logos are trademarks of XM Satellite Radio Inc. Velcro is a registered trademark of Velcro Industries B.V.
