Instruction manual

9
For Blade Guard and Splitter Assembly
1. Splitter Bracket
2. 5/8" Flat Washer (2)
3. M12 x 1.75 Hex Nut (2)
4. M6 x 1x20mm Hex Head Screw
5. 1/4" External. Tooth Lockwasher (2)
6. 5/16" Flat Washer (2)
7. M6 x 1 Wing Nut
8. 13mm Open End Wrench
9. 15/16" Hex Arbor Wrench
For Front Guide Rail
10. M6 x 1x20mm Carriage Head Screw (5)
11. M6.4 Flat Washer (5)
12. M6.1 Lockwasher (5)
13. M6 x 1 Hex Nut (5)
For Fastening Saw to Stand
14. M8 x 1.25 x 16mm Hex Head Screws (4)
15. 3/8" Flat Washer (8)
16. M8 x 1.25 Hex Nut (4)
For Rear Guide Rail
17. M8 x 1.25x16mm Hex Head Screw (5)
18. M8.4 Flat Washer (5)
19. M8.1 Lockwasher (5)
For Extension Wings
20. - M8x1.25x16mm Hex Head Screw (6)
21. - 5/16" Lockwasher (6)
22. - 3/8" Flat Washer (6)
1. - 19" Top Front and Rear Braces (2)
2. - 22-1/2" Bottom Front and Rear Braces (2)
3. - Stand Legs (4)
4. - Feet (4)
5. - 3/8" Flat Washer (32)
6. - M8 x 1.25x16mm Carriage Head Screw (32)
7. - M8 x 1.25 Hex Nut (32)
8. - Bottom Side Braces - 20" in length (2)
9. - Top Side Braces - 16-1/2" in length (2)
Fig. B
Fig. C
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
21
1
2
3
8
9
4
20
6
5
333