Technical Specifications

50-Inch (1270) T-Square
Fence and Rail System
BC50 T2
Specifications
Features
• One piece 14 gage 2 by 3” rectangular steel guide tube,
mounted to on ¼” section angle iron rail.
• Mounting design attaches to Delta® and most other
Table saws Table Saws with Cast iron tables.
• Laminated 9 ply Birch Plywood sides are durable and
non-marring.
• Fence body constructed of 14 gage welded steel.
• Three-point locking system with twin hairline pointers to
assure fence is parallel to blade and accurate to within
1/64 of an inch (0.4mm)
• Easy-gliding, on solid nylon pads, with quick action
handle with magnets to hold handle up in release
position, for easy positioning.
• Fence securely clamps to both front tube only to insure
perfectly parallelism to the blade front to back.
• Quick – Fence removal for locating on either side of the
blade for consistent ripping capabilities on either side of
the blade, left or right tilt saws.
 RH RIP Capacity – 50-Inch (1270mm) Max rip to right of blade
 LH RIP Capacity - 12 Inch (305mm) Max rip to left of blade
 Fence Height – 2-1/2 Inch (64mm)
 Fence Length – 42 Inch – (1067mm)
 Rail Length – 84 Inch (2,136mm)