Technical Specifications

MODEL 80F-HEATER
(Fan /Heater – 80 CFM)
Description
Low noise ceiling mount ventilating fan, and heat.
It is cUL listed and Home Ventilating institute (HVI) certified.
DC Motor/Blower
TYPICAL SPECIFICATION
Ventilation fan shall be model 80F-HEATER ; brushless DC
motor engineered to run continuously for a minimum
70,000 hours; airflow rating of 80 CFM (±10%) and 1.5 Sones
at 0.1 static pressure. Power consumption approximately 11.7
Watts with an efficiency rating approximately 7.6 CFM/Watt.
Duct diameter no less than 4” Built-in thermostat to regulate
temperature. Metal guard to help prevent user contact with
heating wire. Heater element with 1300W and conforms to
cUL safety standards. Heater module equipped with thermal
cutoff fuse and thermostat.





Power rating of 120 volts/60Hz
DC brushless motor engineered to run continuously
Motor equipped with thermal cutoff fuse
Removable with permanently lubricated plug-in motor
Built-in soft start function to increase bearings’
lifeAutomatically powers OFF when impeller is locked
Housing




Galvanized steel body
Detachable 4” diameter duct adapter
Built-in backdraft damper
Easy installation
Grille
 Attractive design using PBT material
 Attaches directly to housing with torsion springs
Warrant
y
 3-year limited warranty
Fan Curve
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.25
0.20
0.10
0
0 30.0 60.0 90.0 120.0 150.0
Air Flow (CFM)
46101 Fremont Blvd., Fremont, CA 94538
|
tel [phone]
|
www.deltabreez.com
Air
Pressure
(IN
H
2
O)
Model Quantity Comments Project:
Location:
Architect:
Engineer:
Contractor:
Submitted by:
Date:
50ft
40ft
30ft
20ft
10ft
Breez 80F-HEATER
4” Duct (Standard)
Static Pressure (inches w.g.) 0.1 0.25
Air Flow (CFM) 80 54
Sones 1.5
N/A
Power Consumption (Watts) 11.7 8.2
Energy Efficiency (CFM/Watt) 7.0 6.6
Current (Amps) 12
Power Rating (V/Hz) 120
/
60
Heating element (Watts) 1300
T
otal power (Watts)
1314
4” Duct (Standard):
80 CFM/1.5 Sones @ 0.1 SP, 10.5 Watts
54 CFM @ 0.25 SP, 8.2 Watts
Heater
 1300W heating element evaluated by cUL for safety standards
 Heater module equipped with thermal cutoff fuse and thermostat