Installation Guide

5
Model: Pro200/ Pro300
ASSEMBLY INSTRUCTIONS
Hardware
MOUNT HOUSING WITH SUSPENSION BRACKETS
ATTACH DUCT CONNECTOR
2
1
Tapping screw
Suspension bracket
Rubber
3
WOODEN HEADER
4. A.Install wooden header between ceiling joists by
using nails or screws.
B.Install the fan body to the wooden header with
long wood screws (Ø 4x25).
A B
16 1/2” 12 1/2”
4
5
DUCT CONNECTION
Ceiling
Fan Body
Tape
Duct
Outside
Gradient
1°~2°
Inside
Duct connector
5. A.Insert the 6” duct (not provided) into the duct
connector and tape all ductwork connections
to make them secure and airtight.
B.Install the duct with a gradient 1°~2° to the
outside.
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
Machine Screw (M4x6)
3. Suspend fan body with anchor bolts (not provided).
1.Attach the duct connector from outside, and secure it
to fan body by using machine screw (M4x6) .
2. Assemble suspension bracket and rubbers to
fan body, secure them to fan body by using
tapping screws ( Ø4 x 10)
Machine screw
(M4 x 6)
Long wood screw