Installation Guide

9
Model: REC80LED
See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals when cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140º Fahrenheit.
CARE AND MAINTENANCE
3. Remove dust and dirt from the fan body
❶
with a vacuum
cleaner.
4. Dampen cloth with dust detergent and wipe the fan body
❶
. Then wipe dry with a clean cloth.
5. Replace LED module
❷
back onto fan body
❶ .
6. Turn on power source to operate fan again.
1
2
3
4
5
2
2
1
Vacuum
cleaner
1
2
Turn off power source. Review all safety precautions.
1. To remove LED module
❷
, squeeze springs and
2. Clean the LED module
❷
in a sink and dry
pull down.
with a cloth.
1