User's Manual Part 1

1.2.2 The NE3000Home Screen

The NE3000device will power up with the below display after the step 1 and 2 listed above. This

display is referred to as the “NE3000home screen” or just the “home screen” in this document.The

home screen is generated by the presentation management software, in the NE3000 device, which

is also known as remote viewer.

Presentation Setup

NE3000 is default at WiFi Hotspot mode with its SSID name displayed at the home screen (e.g.

NVC_4DF8F in box ).Alternatively, you can connect the NE3000 to your existing network via a

wireless connection and/or a wired connection. You can change WiFi setting via “WiFi” Button.

You can also change display setting via “Display” button and other general settings via

“Settings” button. For detailed information, please refer to the section 5.1 NE3000 System

Configuration.

Software Installation

Windows/Mac Users: Enter the URL displayed on the home screen under “Desktop

Streamer” into your web browser and follow the instructions in the

next section.

iPad/Android Users: Follow the instructions in the next section.

Chomebook Users: Follow the instructions in the next section.

Connection