Specifications

VFD-G Series

5-2

00 - 02 AC Drive Status Indication 2 Factory setting: Read Only

Display

Bit 0~1: 00: Run LED is off and stop led is on. (AC Drive stopping)

01: Run LED is blink and stop led is on. (AC Drive deceleration to stop)

10: Run LED is on and stop led is blink. (AC Drive standby)

11: Run LED is on and stop led is off. (AC Drive running)

Bit 2: 1: Jog on.

Bit 3~4: 00: Rev LED is off and FWD led is on. (Forward)

01: Rev LED is blink and FWD led is on. (Reverse to Forward)

10: Rev LED is on and FWD led is blink. (Forward to Reverse)

11: Rev LED is on and FWD led is off. (Reverse)

Bit 5-7: Reserved

Bit 8: Master frequency source via communication interface

Bit 9: Master frequency source via analog

Bit10: Running command via communication interface

Bit11: Parameter locked

Bit12~15: Reserved

00 - 03

Frequency Setting (F) or Closed Loop Control Setting

Point

Factory setting: Read Only

 This parameter displays the frequency command set by the user.

00 - 04 Output Frequency (H) Factory setting: Read Only

 This parameter displays actual output frequency of the AC drive.

00 - 05

Output Current (A) Factory setting: Read Only

 This parameter displays actual output current of the AC drive.

00 - 06 DC-BUS Voltage (U) Factory setting: Read Only

 This parameter displays DC-BUS voltage of the AC drive.

00 - 07 Output Voltage (E) Factory setting: Read Only

 This parameter displays output voltage of the AC drive.

00 - 08 Output Power Factor (n) Factory setting: Read Only

 This parameter displays output power factor.

00 - 09 Output Power (kW) Factory setting: Read Only

 This parameter displays output power of the AC drive.

00 - 10

Feedback Signal Actual Value Factory setting: Read Only

 This parameter displays feedback signal value.

00 - 11 Feedback Signal (%) Factory setting: Read Only

 This parameter displays feedback signal value(%).