Specifications

5
VFD-G Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-17
Setting Functions
Descriptions
18 PID disabled Disable PID feedback control and operate via
Master Frequency Command source Pr.02-00.
19 Run PLC Program
20 Pause PLC Program
Parameter value 32 programs Multi-Function
Input Terminal to enable the AC drive internal
PLC program. Parameter value 33 programs
an input terminal to pause the PLC program.
Note: Pr.05-00 to Pr.05-16 defines the PLC
program.
21 1st Output Frequency Gain
(Pr.04-30)
Output frequency multiplies a gain
(Pr.04-30)
，
H=F*(Pr.04-30)
22 2nd Output Frequency Gain
(Pr.04-31)
Output frequency multiplies a gain
(Pr.04-31)
，
H=F*(Pr.04-31)
23 3rd Output Frequency Gain
(Pr.04-32)
Output frequency multiplies a gain
(Pr.04-32)
，
H=F*(Pr.04-32)
04 - 04 Digital Input Terminal Response Time Factory Setting: 01
Settings 01~20
 This parameter selects the response time of digital input terminals MI1 to MI4, EF and
FWD.
 AC drive will scan the digital input terminals once every 2msec. During each scan the drive
will check the status of each terminal (open or closed).
 In noisy environments, it would be advantageous to verify the terminal status several times
before executing a new command, nearly eliminating false signals.
 Example: If Pr.04-04 is set to 4, the AC drive will confirm the terminal status (4+1 = 5) 5
times before a change is made. This correlates to an 8~10msec time response from input
command to execution.
 It is not recommended to set this parameter to 00, since interference may cause improper
operation of the AC drive.
04 - 05 Minimum AI1 Analog Input Factory Setting: 0
04 - 06
Maximum AI1 Analog Input Factory Setting: 100
Settings 0 ~ 100% Unit: 1
04 - 07 Minimum Output that corresponds to AI1 Factory Setting: 0.00
04 - 08 Maximum Output that corresponds to AI1 Factory Setting: 100.00
Settings 0.00~100.00% Unit: 0.01