User manual

Chapter 5 Description of Parameter Settings

Example 6:

In this example, a negative bias is used to provide a noise margin. Also a

potentiometer frequency gain is used to allow the Maximum Output Frequency to

be reached.

Pr.4-00=6Hz--Potentiometer Bias Freq.Pr.4-01=1 --- Bias Polarity

Example 7:

In this example, the potentiometer is programmed to run a motor is both forward

and reverse direction. A motor will be idle when the potentiometer position is at

mid-point of its scale. Using Pr.4-03 will disable the external FWD and REV

controls.