User manual

Chapter 5 Description of Parameter Settings

d6 External Reset:

Parameter value d6 programs a Multi-Function Input Terminal: M1 (Pr.4-04),

M2 (Pr.4-05), M3 (Pr.4-06), M4 (Pr.4-07) or M5 (Pr.4-08) to be an External

Reset.

Note: the External Reset has the same function as the Reset key on the Digital

keypad. After external fault such as O.H., O.C. and O.V. are clear, this input

can be used to reset the drive.

d7, d8, d9 Multi-Step Speed Command:

Parameter values d7, d8, d9 programs any three of the following Multi-Function

Input Terminals: M1 (Pr.4-04), M2 (Pr.4-05), M3 (Pr.4-06), M4 (Pr.4-07) or M5

(Pr.4-08) for multi-step speed command function.

Mx "Close": Operation available

These three inputs select the multi-step speeds defined by Pr.5-00 to Pr.5-06

as shown in the following diagram. Pr.5-07 to Pr.5-16 can also control output

speed by programming the AC drive’s internal PLC function.