User manual

Chapter 5 Description of Parameter Settings

Example 1 (Pr.5-07 = d1): Execute one cycle of the PLC program. Its relative

parameter settings are:

1. Pr.5-00 to 5-06: 1

to 7

step speed (sets the frequency of each step speed

2. Pr.4-04 to 4-08: Multi-Function Input Terminals (set one multi-function terminal

as d17- PLC auto-operation.

3. Pr.3-05 to 3-06: Multi-Function Output Terminals (set a Multi-Function Terminal

as d10-PLC operation indication, d11-one cycle in PLC auto mode or d12-PLC

operation fulfillment attainment).

4. Pr.5-07: PLC mode.

5. Pr.5-08: Direction of operation for Master Frequency and 1

to 7

step speed.

6. Pr.5-09 to 5-16: operation time setting of Master Frequency and 1

to 7

step

speed.

Note: The above diagram shows one complete PLC cycle. To restart the cycle,

turn the PLC program off and then back on.