User manual

Chapter 5 Description of Parameter Settings

Example 5 (Pr. 5-07 = d1 Execute one cycle of the PLC program):

In this example, the PLC program runs continuously. It should be noted that the

times of reserve motion may be shorter than expected, due to the accel/decel

times.

5 - 08 PLC Forward/Reverse Motion Factory Setting: d 0

Settings d 0 to d 255

& This parameter controls the direction of motion for the Multi-Step Speed Pr.5-

00 to Pr.5-06 and the Master Frequency. The original direction of Master

Frequency will become invalid.