User manual

Chapter 8 Summary of Parameter Settings
© 1999 DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
109
Group 4 Input Function Parameters
Parameters Explanation Settings
Factory
Setting
d0: Disable
4-09 Line Start Lockout
d1: Enable
0
Group 5 Multi-Step Speed and PLC Parameters
Parameters Explanation Settings
Factory
Setting
5-00 1
st
Step Speed Freq. 0.0 to 400 Hz 0.0
5-01 2
nd
Step Speed Freq. 0.0 to 400 Hz 0.0
5-02 3
rd
Step Speed Freq. 0.0 to 400 Hz 0.0
5-03 4
th
Step Speed Freq. 0.0 to 400 Hz 0.0
5-04 5
th
Step Speed Freq. 0.0 to 400 Hz 0.0
5-05 6
th
Step Speed Freq. 0.0 to 400 Hz 0.0
5-06 7
th
Step Speed Freq. 0.0 to 400 Hz 0.0
d0: Disable PLC Operation
d1: Execute one program cycle
d2: Continuously execute program cycles
d3: Execute one program cycle step by step
5-07 PLC Mode
d4: Continuously execute one program cycle
step by step
0
5-08
PLC Forward/
Reverse Motion
0 to 255 (0:FWD 1:REV) 0
5-09 Time Duration Step 0 0 to 65500 sec 0
5-10 Time Duration Step 1 0 to 65500 Sec 0
5-11 Time Duration Step 2 0 to 65500 Sec 0
5-12 Time Duration Step 3 0 to 65500 Sec 0
5-13 Time Duration Step 4 0 to 65500 Sec 0
5-14 Time Duration Step 5 0 to 65500 Sec 0
5-15 Time Duration Step 6 0 to 65500 Sec 0
5-16 Time Duration Step 7 0 to 65500 Sec 0