Datasheet

ManualsBrandsDelta Electronics ManualsPower SupplyCliQ

TECHNICAL DATASHEET

CliQ DIN Rail

Power

Supply

12V 15W 1

Phase

/ DRP012V015W1A□

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (September 2013, Rev. 03)

Highlights & Features

– Reliable design, with expected life of 10 years

– Compact, rugged design for ease of handling and installation

– Multiple connections to terminals allowed

– With Conformal Coating on PCBA (DRP012V015W1AZ)

– Class I, Div 2 Hazardous Locations (DRP012V015W1AY)

– Meets worldwide safety requirements

– RoHS Directive 2011/65/EU Compliant

– Worldwide AC input range without power de-rating

– Overvoltage / Overcurrent / Over Temperature Protections

– 150% Power Boost (steady state peak load) for 3 seconds

Safety Standards

CB Certified for worldwide use

Model Number: DRP012V015W1A□

Unit Weight: 0.18 kg

Dimensions (L x W x D): 100 x 32 x 100.6 mm

General Description

The DRP012V015W1A□ is part of the CliQ series of DIN Rail power supplies from one of the world’s largest power supply manufacturers

and solution providers - Delta. This product provides an adjustable output capable of operating from input voltages at 85-264Vac, and a

wide temperature range of -20°C to 75°C. With a rugged, compact plastic case design that meets shock and vibration requirements (in

accordance to IEC60068-2-27 and IEC60068-2-6 respectively), and conformal-coated PCB assembly, this state of the art design is well

suited to a broad variety of industrial applications worldwide.

Model Information

CliQ DIN Rail Power Supply

Model Number Input Voltage Range Output

oltage Output Current

DRP012V015W1A□

85-264Vac (120-375Vdc) 12Vdc 1.25A

Model Numbering

DRP P 012V

015W 1 A

□

DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ Series Y - Plastic case

with Class I, Div 2

Z- Plastic case

without Class I, Div 2

Summary of content (11 pages)

PAGE 1
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Highlights & Features – – – – – – – – – – Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed With Conformal Coating on PCBA (DRP012V015W1AZ) Class I, Div 2 Hazardous Locations (DRP012V015W1AY) Meets worldwide safety requirements RoHS Directive 2011/65/EU Compliant Worldwide AC input range without power de-rating Overvoltage / O
PAGE 2
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240Vac Input Voltage Range 85-264Vac Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Nominal DC Input Voltage 125-250Vdc DC Input Voltage Range 120-375Vdc Input Current < 0.37A @ 115Vac, < 0.22A @ 230Vac Efficiency > 84.0% @ 115Vac, > 83.
PAGE 3
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Environment Surrounding Air Temperature Operating Storage -20°C to +75°C Operating Humidity -25°C to +85°C > 50°C de-rate power by 2.
PAGE 4
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Safety Standards / Directives Electronic Equipment in Power Installations EN50718 / IEC62103 Electrical Safety TUV Bauart to EN60950-1, UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1 Industrial Control Equipment UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 Hazardous Location / ATEX (For DRP012V015W1AY) cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.
PAGE 5
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Block Diagram Device Description 1) 2) 3) 4) 5 Input & Output terminal block connector DC voltage adjustment potentiometer DC OK control LED (Green) Universal mounting rail system All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (September 2013, Rev.
PAGE 6
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Dimensions L x W x D: 100 x 32 x 100.6 mm Engineering Data De-rating Note 1. 2. 3. 4. Fig. 1.1 De-rating for Vertical Mounting Orientation > 50°C de-rate power by 2.5% / °C, > 70°C de-rate power by 4% / °C 6 5. All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (September 2013, Rev.
PAGE 7
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Output De-rating VS. Input Voltage ■No output power de-rating across the entire input voltage range Assembly & Installation The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN60715. The device should be installed horizontally with input terminal blocks on the bottom. Each device is delivered ready to install. Mounting Snap on the DIN rail as shown on the left: 1. Pull the DIN rail’s latch OUT.
PAGE 8
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Safety Instructions – – – – – – – – ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned OFF, there is risk of explosion / severe damage. To guarantee sufficient convection cooling, keep a distance of 50mm above and below the device as well as a lateral distance of 20mm to other units.
PAGE 9
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Inrush Current Inrush current is the peak, instantaneous, input current measured and, occurs when the input voltage is first applied. For AC input voltages, the maximum peak value of inrush current will occur during the first half cycle of the applied AC voltage. This peak value decreases exponentially during subsequent cycles of AC voltage.
PAGE 10
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Over Temperature Protection Short Circuit Protection As mentioned above, the power supply also has Over Temperature Protection (OTP). This is activated when the overload condition persists for an extended duration and the output current is below the overload trigger point but >100% load. In the event of a higher operating condition at 100% load, the power supply will run into OTP when the surrounding air temperature is >80°C.
PAGE 11
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 12V 15W 1 Phase / DRP012V015W1A□ Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EC limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment.