User's Manual

12
The Ethernet speed supports 10/100 Mbps. Please change router setting to
support it if you use the 1000Mbps router.
Our device can’t support the internet which has “Proxy” or “Firewall” and
“ISP disconnect” to transmit the data. So, please kindly checking about these
conditions if you meet the data can’t transmit to the server.
DDP MENU
The DDP has three buttons on the box labeled, “MENU”, “SELECT” and “DOWN”.
The user can depress the “MENU” button to turn on the LCD Display (OLD) menu.
Our DDP OLD menu includes the “OLED CONFIG”, “DATE/TIMING SET UP”,
“DST CONFIG”, “LCD DISPLAY CONFIG”, “SYSTEM RESET”, “RSSI DETECT”,
“WPS (WiFi Protection Set up) START” and “EXIT MENU”. You can use the
“DOWN” button to scroll the menus that are like interface menus (OLED/TIME)
and SYSTEM MENU (RSSI DETECT/SYSTEM RESET/WPS START) and so on.
Attention
“RSSI DETECT” and “WPS START” menu can choice if user selects the
WiFi transmitter. If you choice another (Ethernet), it will disappear.
All settings are not storage beside the “DST CONFIG”. Please re-set again if you
plug AC on/off.
> OLED CONFIG
DATE/TIMING SET UP
DST CONFIG
LCD DISPLAY CONFIG
SYSTEM RESET
RSSI DETECT
WPS START
EXIT MENU