User's Manual

13
Interface Screen (OLED / DATE)
This screen lets the user adjust the function status. User can press “OLED
CONFIG” menu to choose the OLED fonts display or dormancy mode. You can
manually configure the calendar when you choose the enable item in
“DATE/TIMING SET UP” menu.
In OLED menu, the user can select “POWER ALWAYS ON” or “POWER SAVE MODE”.
“POWER ALWAYS ON” means the OLED fonts will always stay lit. “POWER SAVE
MODE” means the OLED fonts will darken after 30 sec and LED will blink at right
up side. The OLED fonts will light again when the user presses any buttons. The
default value is “POWER SAVE MODE”.
In DATE/TIMING menu, you can adjust the calendar manually. The ‘#’ will appear
when you press “SELECT” and then you can adjust it. The value adjusts
individually as you press the “DOWN” button. The character will blink per second
when you hold it. It will jump to next value to adjust when you press the “SELECT”
button. The ‘#’ will disappear when set up is finished.
You do not need to adjust calendar manually if you register with our Delta Solar
EMS webpage. It can get the local time automatically. The default values are
00/00/00 00:00:00.
Attention
The DATE indicate as: Year / Month / Day
The TIME indicate as: Hour/ Min / Sec
OLED CONFIG
DATE/TIMING SET UP
POWER ALWAYS ON
# POWER SAVE MODE
DATE: 00/00/00
TIME: 00:00:00