User's Manual

32
Step 3. Then, please keep following the step 5 until finish all operations with
“Login and Register Screen with Connect to Internet” session.
Event Messages
The table below lists the all messages that the DDP can produce to indicate certain
conditions. These messages are displayed on our webpage and they can provide
Delta Customer Support with needed information, if you should call for assistance.
The Message Displayed:
LCD Status Indication EMS Status Description
0001 Input over voltage The PV Micro-Inverter detects
an input over-voltage event
0002 Input under voltage The PV Micro-Inverter detects
an input under-voltage event
0004 Input over current The PV Micro-Inverter detects
an input over-current event
0008 Output over voltage The PV Micro-Inverter detects
an output over-voltage event
0010 Output under voltage The PV Micro-Inverter detects
an output under-voltage event
0020 Output over current The PV Micro-Inverter detects
an output over-current event
0040 Output over frequency The PV Micro-Inverter detects
an output over-frequency event
0080 Output under frequency The PV Micro-Inverter detects
an output under-frequency
event
0100 Islanding effect The PV Micro-Inverter detects
an unintentional islanding
event
0200 Ground fault detection &
interruption
The PV Micro-Inverter detects
a ground fault event
0400 Main point over
temperature
The PV Micro-Inverter detects
an over-temperature event
from main thermal sensing
point
0800 Second point over
temperature
The PV Micro-Inverter detects
an over-temperature event