User's Manual

Grid Code Setting
Once you finished the Micro Inverter registration process, then you MUST do the “Grid Code
Setting”.
It is the responsibility of the installer to follow local installation regulations and
guidelines in accordance with local electrical codes and Nation electrical codes for
electrical installation as specified by the Clean Energy Council.
Step 1: Find the IP address shown on your Data Collector OLED display. (Note: The IP address
depends on your network environment.
Step 2: In your PC side, open your web browser, and key-in the IP address as shown on Data
Collector. Then, enter the Data Collector embedded web page.
Step 3: Add the #1234 after the IP address.
169.254.0.1
TTL ENERGY: 0.0kWh