User's Manual

DFCE-NNN40-DTxR
mbed Kit User Guide Sheet 3 of 15 Aug 11, 2015
Proprietary Information and Specifications are Subject to Change
Revision History
Version Date Reason of change Maker
0.1 2015/2/11 First release Tsungta Wu
0.2 2015/4/14
a. Remove Virtual COM port feature from HDK in
whole document
b. update section 1, section 1.1, section 2.1, section
4, section 4.1 to improve readability
c. add section 2.2 DELTA DFCE-
NNN40 mbed kit
hardware figure
d. change 3.3V to 3.6V and 3V3 to 3V6 in whole
document
e. Change document title and footnote
f. Remove UV sensor in the whole
g. Remove wording in section 2.3
h. Update figures in section 4.2
i. Update table in section 4.5
j. Update link in section 2.3.1
k. Update section 4.3
Tsungta Wu
0.3 2015/5/29
Add section 3.3 Setup Virtual Com Port Driver and
section 4.6 UART Configuration
Tsungta Wu
0.4 2015/6/2 Update Platform Pin Out image Tsungta Wu
0.5 2015/6/3 Update section 3.3 Tsungta Wu
0.6 2015/7/15 Update section 4.2 Kit PIN OUT Marco.Hsu
0.7 2015/8/11
Add platform hyperlink
Update section 4
Tsungta Wu