User Manual Chapter 3

3-8
Port Address
This option box allows you to enable/disable (None) the parallel port in the
back of the notebook. If you decide to enable the parallel port you should
allocate an LPT and interrupt address to it. If you disable the parallel port, all
other boxes on this page will be grayed out.
Port Definition
This option box allows you to set a port mode for parallel communications.
Interrupt Setting
This option box allows you to change the IRQ address for the parallel port.
DMA Setting For ECP Mode
This option box allows you to allocate a DMA address to the parallel port
when using ECP mode. If you are not using ECP mode, this box will be
grayed out.
Keyboard Num Lock
You can either enable or disable this option. If enabled the keyboard Num
Lock function will always be on by default when you start the system.
Keyboard Repeat
When you select this option, a dialog box will pop up allowing you to
customize the keyboard auto repeat rate and repeat delay. These options set the
reaction speed of your keyboard to your typing.