User Manual Chapter 3

3-13
Exit
When you have made changes to the setup utility, either press the [Esc] key, or
highlight the Exit option on the menu bar.
Save and Exit
When you select this item, a dialog box will pop up asking you to confirm
your choice to save the changes you just made and restart the computer. This
dialog box will also appear if you press the [Esc] key in the main screen area
of the system configuration utility.
Exit (No Save)
When you select this option, a dialog box will pop up asking you to confirm
your choice to discard any changes you just made and restart the computer.
The computer will then restart using the old values.
Default Settings
When you select this option, a dialog box will pop up asking you to confirm
your choice to load the default values for all fields. The computer does not
restart. You must use the Save and Exit option above to restart the computer
using the default values.
Restore Settings
When you select this option, a dialog box will pop up asking you to confirm
your choice to restore the current setup values to the original custom values.
The computer does not restart. You must use the Save and Exit option above
to restart the computer using the default values.