User's Manual Chapter 5

5-11
adapter. They can also be used as storage devices using memory chips or
miniature hard disks. If you are using PC card storage devices, they will be
assigned drive letters (for example E: or F:).
PC Card Standards
This system supports type-I, type-II, and type-III PC cards. If you are using
type-1 or type-II cards (which are usually about 2.5mm high), you can install
one or two cards at the same time. If you use a type-III card (which is usually
about 10mm high), you must install it in the lower card slot, and you will not
be able to use the upper slot.
Using PC Cards
1. You can install or change PC cards while your notebook is turned on.
2. Locate the PC card slot compartment on the left side of the notebook, and
open the compartment door.
PC Card Slot Compartment
Figure 5-12: PC Card Slot Compartment
3. Orient the card correctly. The label side of the card faces up. One of the
narrow edges has a double row of pinholes. This edge inserts into the slot.