User's Manual Chapter 5

5-3
FN + F3 Press Once: video to monitor port only
Press Again: Video to LCD & monitor port
Press Again: Video to LCD
NOTE
: You can also assign additional keyboard hot key combinations,
for switching the display, using the video software described below.
TV-out Port
The TV-out port is a standard RCA-type jack. You can attach a standard A/V
(audio/visual) cable into this port to connect your notebook to a TV receiver, a
camcorder, or a videocassette recorder.
To send your notebook’s video signal to the TV-out port, you must first use
the video software utility to make sure everything is configured properly for
transfer of the video signal to the TV format. You particularly want to make
sure that you are using the right TV standard, i.e. either PAL or NTSC.
Before using the TV-out port, you must always change the resolution of your
computer’s display down to 800 x 600 (SVGA) or 640 x 480 (VGA). You
cannot export the video image to a TV receiver while you notebook is
displaying at the default resolution of 1024 x 768.
After you have made all the necessary changes required in order to send the
notebook video to the TV-out port, you can use the video software described
below to switch the video between the built-in screen and the TV-out port.
NOTE
: You can also assign keyboard hot key combinations for
switching the display, using the video software described below.