User's Manual

ManualsBrandsDelta Electronics ManualsElectronicsNovoConnect A Wireless Presentation & Conference System

Table Of Contents

Hardware Specification

CPU (SoC)

DDR3

Storage

WiFi

Input/Output

LED Indicator

Button/Switch

• ARM Cortex A9

• Video Decoder/Encoder (H.264, VC-1, VP8)

1024MB (512MB x 2)

• Internal: 4GB (eMMC Flash)

• External: Micro SD-Card slot

802.11 b/g/n (2.4GHz & 5GHz)

USB Input USB Type A x 1

Video Output Mini HDMI x 1

Wi-Fi 2.4G/5G Dual Band

Card reader Micro SD Card slot x 1

Power Input Micro USB 5V 1A Audio x 1

Green=Power on

Reset

Application Requirement

PC Software: DesktopStreamer

Tablet Apps: NovoPresenter

Android Tablets Minimum requirement

Resolution

Android 3.2 and above

Recommended: 1024x768, 1280x800, or Higher

Minimum requirement

CPU

RAM

Intel Pentium, 2GHz (i3 and above are preferred)

Windows XP, Windows 7, Win8 (32 bits and 64 bits)

4GB

iOS Minimum requirement

Device Type

iOS 5.1 and above

iPad, iPad 2, iPad 3, iPad 4, iPad mini

NovoConnect™

Taiwan

Delta Electronics Inc. Education Solutions and Service Department

186, Ruey Kuang Road, Neihu, Taipei

11491, Taiwan R.O.C.

T +886-2-8797-2088 / F +886-2-8797-2120

www.deltaww.com

A Wireless Presentation &

Conference System

B360

Summary of content (3 pages)

PAGE 1
Hardware Specification CPU (SoC) • ARM Cortex A9 • Video Decoder/Encoder (H.264, VC-1, VP8) DDR3 1024MB (512MB x 2) Storage • Internal: 4GB (eMMC Flash) • External: Micro SD-Card slot WiFi 802.11 b/g/n (2.4GHz & 5GHz) Input/Output USB Input USB Type A x 1 Video Output Mini HDMI x 1 LED Indicator Wi-Fi 2.
PAGE 2
Product Introduction Two Configurations Supported: NovoConnect™ is a new generation wireless presentation and conference system. From classrooms to conference rooms, it allows participants to seamlessly hand-over display between PC, Mac, Tablet, and Smartphone devices to conduct interactive presentations with dynamic content sources and HD display quality. 1.
PAGE 3
Information to the user. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.