Launching into your NovoConnect collaboration system User manual
PACKAGE CONTENTS 1 2 LauncherPlus x 2 units 1 Holder (Optional)
OVERVIEW The “LauncherPlus” is an accessory for NovoPRO, which has physical buttons for users to interact with the NovoPRO collaboration system, as well as eliminates the needs of installing software on PC or Mac. It is USB-powered and plug-and-play.
Product Descriptions Buttons Center Button Multi-function button Single click - enable full-screen projection Long press - disconnect from the NovoPRO device These buttons are operational only after your computer is connected Buttons 1/2/3/4 to the NovoPRO device. Single click - project your computer to the corresponding display quadrant. LEDs 1) When the Launcher is plugged into your computer, all LEDs light up momentarily.
GETTING STARTED 1 Connect your Windows or Mac computer to the same network as the NovoConnect 2 Insert the Launcher into a USB port of your computer 3 Browse to and double-click the "Launcher" drive on your computer 4 Double-click the Launcher application "Launch Novo". 5 To connect to a NovoConnect device, a. First check the IP address and PIN code match the NovoConnect device. b. Then click on the Center Button to connect.
Specification Hardware Specification Product / Model LauncherPlus / QL300 Power Consumption USB , 5VDC, 500mA Interface USB Buttons 5 Dimensions 70 x 70 x 15 mm (L x W x H) Weight 60g Software Features OS supported Windows 7 and above / Mac 10.
ADDITIONAL INFORMATION Safety & Warning Information FCC – Federal Communication Commission (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ADDITIONAL INFORMATION FCC – RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter. • The highest SAR value for this device is 0.947W/kg.
Vivitek 4F, No. 186, Ruey Kuang Road, Neihu, Taipei 11491, Taiwan R.O.C. T: +886-2-8797-2088 F: +886-2-6600-2358 www.vivitekcorp.