User's Manual

UM
XXXXXX
Rev 01 page
28
of
79
User Manual –I-Series 4 Slate
Disconnecting a connected Wireless Network
• Tap setting of the connected device.
• Tap (FORGET) icon to disconnect.
Ethernet
Note: To connect the I-Series 4 Slate to Ethernet, it will need an Elo I/O hub (E391994) or a POS stand (E392186/E482347). When available, the
I-Series 4 Slate will automatically prioritize the ethernet connection. If the I-Series 4 Slate does not, please follow the steps below.
• Place the I-Series 4 into the Elo Home APK.
• Set Wi-Fi to disable.
 Go to Wi-Fi settings, tap Use Wi-Fi to disable .
• Tap Ethernet.
• Tap toggle switch to enable .
Airplane mode
This will disable all of the wireless transmission functions. Including cellular, Wi-Fi, and Bluetooth.
• To enable , tap Airplane mode.
USB tethering
This feature is for sharing Internet connection to another device using a USB cable.
Note: The USB cable must be connected first from I-Series 4 to another device or PC. If using the IO Hub plug in a USB type A cable
from your PC in any one of the four USB type A ports. If using the POS stand, plug in to one of the four USB ports in the neck of the
stand behind the Display. See Connected device → USB on this user manual.
• Tap Hotspot and tethering.
• Tap USB tethering, to enable .
Bluetooth tethering
This feature is for sharing internet network connection to another device using Bluetooth.
Note: The Bluetooth must be paired first from I-Series 4 to another device or PC. See Connected devices → Bluetooth on this user
manual.
• Tap Hotspot and tethering.
• To enable , tap Bluetooth tethering.