User's Manual

UM
XXXXXX
Rev 01 page
30
of
79
User Manual –I-Series 4 Slate
Connected devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter Settings → Connected devices →
USB
Note: To activate the USB settings, connect the USB cable from the I-Series 4 to another device or PC. Once the I-Series detects the external
computer, it will become available in the USB preference settings.
• Tap USB.
• From USB Preferences under USE USB FOR choose and tap a feature to enable.
Bluetooth
Note: Make sure the BT device is on and is discoverable.
• Tap Connection preferences.
• Tap Bluetooth.
• Tap toggle switch to ON .
• Tap + Pair new device.
• From Available devices screen, tap a device to pair.
• When a pairing request message appears.
 File transfer – This will share I-Series 4 internal and SD shared storage.
 USB tethering – This will share internet network connection.
 MIDI - Musical Instrument Digital Interface.
 PTP - Picture Transfer Protocol.
 No data transfer – (Default Setting) No data will be transferred even if the USB cable is
connected.