User's Manual
Table Of Contents
- Section 1
- Section 2
- Section 3
- Section 4
- Section 5: Technical Support and Maintenance
- Section 6: Regulatory Information
- Section 7: Warranty Information
UM
XXXXXX
Rev 01 page
31
of
79
User Manual –I-Series 4 Slate
• Verify the pairing number is the same.
• If the pairing requests a PIN, enter the PIN.
• Tap PAIR, to connect.
• When the Bluetooth device is successfully connected to I-Series 4, the connection will show as Active or Connected.
Unpair a paired Bluetooth Device
• Navigate back to ‘Connected devices’ screen, from AVAILABLE MEDIA DEVICES or PREVIOUSLY CONNECTED DEVICES.
• Tap settings of the connected device (e.g. JBL Flip 3).
• In the settings menu, it is possible to DISCONNECT, FORGET (to unpair the device) and to enable and disable Phone calls, Media
audio and Contact sharing.
Cast
This allows to mirror the I-Series display onto a wireless display device (e.g. Smart TV).
Note: Make sure the wireless display capable device and I-Series 4 are on the same wireless network. See Network & Internet connection on
this user manual.
• Tap Connection preferences.
BT Device Setting