Datasheet

S24SE/S24DE series
20W Single/Dual Output DC/DC Converter
DS_S24SE/S24DE 20W _03262013
E-mail:[e-mail]
http://www.deltaww.com/dcdc
P11
Mechanical Drawing with heat sink(optional)
Mechanical Dimensions Physical Outline
1 Heat sink
Material: Al-6063
Finish: anodize black
Weight: 4grams
2 Clamp
Material: spring steel
Finish: Nickel plating
3 Thermal pad
Material: Sil-pad
Thermal conductivity: 1.6W/m-K
4 Model weight: 22.5 grams
¾ All dimensions in mm (inches)
¾ Tolerance: X.X±0.5 (X.XX±0.02)
X.XX±0.25 ( X.XXX±0.010)
Note:
1. add heat sink to help heat dissipation and increase reliability of convert oprating at high ambient temperature
2. please refer derating curve while upgrate the operating temperature of converter
3. heat sink will be mounted for volume orders, separated heat sink only be supplied for prototype
4. for model with heat sink option, the recommended layout only need note the length more larger than without heat sink
Part Numbering System
S 24 S E 050 04 N D F A
Form
factor
Input
voltage
Number
of output
Product
series
Output
voltage
Output
current
On/off
logic
Pin length Option Code
N -
Negative
D - 0.24”
T - 0.22”
A – Standard.
(with metal
case)
S 24 – 9~36V S - Single
D - Dual
E - Series
No.
050 – 5.0V 04 - 4A
P - Positive
R - 0.17”
F - RoHS 6/6
(Lead Free)
H – With heat
sink
WARRANTY
Delta offers a three (3) years limited warranty.Complete warranty information is listed on our web site or is available upon
request from Delta.
Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for
its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these
specifications at any time, without notice.