Datasheet

DS_SE03S/D_08222014 E-mail: [e-mail]
http://www.delta.com.tw/dcdc
Power Derating Curve
~
]
Ambient Temperature
Output Power (%)
0
20
40
60
80
100
-40 0 20 60 100
110
8040
Natural
convection
100LFM
200LFM
400LFM
Notes
1
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3
Ripple & Noise measurement bandwidth is 0-20MHz.
4
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not
damage these modules; however they may not meet all specifications listed.
5
All DC/DC converters should be externally fused at the front end for protection.
6
Specifications subject to change without notice.
7
It is not recommended to use water-washing process on SMT units.
Mechancial Drawing
Mechanical Dimensions
Connecting Pin Patterns
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Pin Connections
Physical Characteristics
Pin
Single Output
Dual Output
Case Size
:
32.3x14.8x10.2mm (1.27x0.58x0.4 Inches)
1,2
-Vin
-Vin
Case Material
Non-Conductive Black Plastic
3,11,14,22
NC
NC
:
(flammability to UL 94V-0 rated)
10
NC
Common
Weight
:
8.8g
12
NC
-Vout
13
+Vout
+Vout
15
-Vout
Common
23,24
+Vin
+Vin
NC : No Connection
P3
2.18
1
24
2
23
3
22
10
15
11
14
12
13
10.2 0.5
[0.4 0.02]
0.5 [0.02]
5.08
[0.2]
32.3 [1.27]
17.78 [0.7]
0.50 [0.02]
[0.09]
5.08
[0.2]
14.8 [0.58] 16.1 [0.63] 18.8 [0.74]
9.7 [0.38]
0
~
5
0.15 S
S SEATING
PLANE
27.94 [1.10]
2.54 [0.10] 17.78 [0.70] 1.0 [0.04]
2.6 [0.10]
20.0 [0.79]